Arch Window Shades Fixed Cellular Blinds for Half Circle Window

Custom Fixed Arch Cellular Shades – 25mm Fan-Shaped Honeycomb Blinds Complete your arched window with a custom-sized...
SKU: 950.007
Product Type: Cellular Shades
$17.00 USD
$17.00 USD

Customize Your Shades

Custom Fixed Arch Cellular Shades – 25mm Fan-Shaped Honeycomb Blinds

Complete your arched window with a custom-sized honeycomb shade that follows a distinctive fan-shaped design. Nonwoven cellular fabric and an aluminum alloy rail provide a neat, fixed covering for semicircular windows.

  • Fixed, Non-Operable Design
  • 0.98 in / 25 mm Cells
  • Custom Sizing
  • Aluminum Alloy Rail

Key Details at a Glance

Custom Width Range 11.81–29.53 in 300–750 mm
Cell Size for This Product 0.98 in / 25 mm Fan-shaped honeycomb fabric
Fabric Options 3 Light-Control Choices Blackout · Light Filtering · Sheer
Full Circular Windows 2 Semicircular Shades Two separate halves meet at the center

Fixed coverage: This shade stays in position after installation. It does not raise, lower, or open and close like a standard operable cellular shade.

Installation Requirements

Confirm the window shape, mounting space, and fixing arrangement before ordering. Accurate width and height measurements are only part of checking the fit.

Check the Arch Shape

Measure the straight base and the center height. For a true semicircle, the height equals half the width. If your arch is flatter, taller, or irregular, send a front-facing photo and measurements for review.

Check Available Recess Depth

Measure the usable depth where the shade will be fitted. Confirm that the rail, fabric, and fixing hardware will fit within the available space. Ask us to confirm the minimum depth for your installation.

Confirm the Mounting Surface

Provide a clear photo of the surface intended to support the straight rail. Confirm the mounting method and required fixings for your window before placing the order.

Allow for Obstructions

Check for handles, hinges, trim, and inward-opening window parts. The fixed shade must fit without interfering with these components.

Cell size is not installation depth. The 0.98 in (25 mm) specification describes the honeycomb cell size; it is not a minimum recess-depth measurement. Confirm mounting clearance separately.

Custom Sizing & Product Specifications

Each shade is made to confirmed dimensions within the listed width range. Provide the actual window measurements and confirm the final order size, arch profile, and any size deductions before production.

Fixed Arch Cellular Shade Specifications
Product Type Custom fixed arch cellular shade with fan-shaped honeycomb fabric
Operation Fixed / non-operable
Width Range 11.81–29.53 in (300–750 mm)
Center Height Made to the confirmed arch profile; measure from the straight base to the highest point.
Listed Maximum Area 19.38 sq. ft. (1.8 m²). Final size eligibility requires confirmation; this figure does not extend the listed width range.
Cell Size — This Listing 0.98 in (25 mm)
Additional Cell Size 1.50 in (38 mm). Contact us to confirm availability for your requested configuration.
Rail Material Aluminum alloy with a smooth coated finish
Fabric Material Nonwoven fabric
Fabric Options Blackout, light filtering, and sheer
Blackout Fabric Construction Internal aluminum foil layer in the blackout fabric option
Fabric Retention PVC insert secures the fabric in the rail
Full Circle Configuration Two separate semicircular shades combined, with a center join

Inch and square-foot figures are rounded conversions of the metric specifications. Confirm unusual arch shapes and final dimensions before ordering.

How to Measure Your Arch Window

Arch window measuring guide showing width across the straight base and vertical center height from the base to the top of the arch.
Measure the straight base width and the vertical center height of the arch.
  1. Measure width (W). Measure straight across the base of the arched opening from one side to the other.
  2. Measure center height (H). Measure vertically from the midpoint of the base to the highest point of the arch. Do not measure along the curved edge.
  3. Measure the available depth. Record the usable recess depth and note any obstructions near the planned mounting position.
  4. Check the profile. For a true semicircle, H = W ÷ 2. If your opening has different proportions, send us a photo and both measurements before ordering.
  5. Confirm the order dimensions. Tell us whether your measurements are the window opening size or the required finished shade size. Confirm any deductions before entering the final order size.

Covering a Full Circular Window

A full circle requires two semicircular shades. One half covers the upper section and the other half covers the lower section. The two units meet across the center of the circular opening.

Semicircular Window

Required quantity: 1 shade

Provide the base width and center height of the semicircular opening.

Full Circular Window

Required quantity: 2 shades

Provide the full diameter and confirm the dimensions and mounting layout for both halves.

Geometry reference for a true circle with diameter D:

Each half: Width = D  ·  Height = D ÷ 2

These are opening geometry measurements. Final shade dimensions must account for the confirmed mounting arrangement and clearances. The finished configuration has a center join; it is not one continuous circular shade.

Fabric Choices & Rail Construction

Blackout Fabric

Nonwoven cellular fabric with an internal aluminum foil layer for light-blocking coverage.

Light-Filtering Fabric

Softens incoming daylight while retaining the distinctive fan-shaped honeycomb appearance.

Sheer Fabric

A more translucent option for gentle light diffusion and a lighter appearance.

Aluminum Alloy Rail

A sturdy aluminum profile with a smooth electrostatic spray finish supports the fabric. A PVC insert holds the fabric securely in the rail.

Blackout describes the fabric. Light may still enter around the perimeter or at the center join of a two-piece circular configuration. Confirm the available colors for your selected fabric before ordering.

Frequently Asked Questions

Can this arch shade be opened or lowered?

No. This is a fixed, non-operable shade designed to remain in its fitted position.

What width can I order?

The listed custom width range is 11.81–29.53 in (300–750 mm). Send the width, center height, and a photo of your window so we can confirm the arch shape and final size.

Can it cover a completely round window?

Yes. A full circular window requires two semicircular shades combined at the center. Confirm the sizing and mounting arrangement for both halves before ordering.

Does 25 mm mean the minimum installation depth?

No. It is the honeycomb cell size. The available recess depth and the space needed for the rail and mounting hardware must be checked separately.

Is a 38 mm cell size available?

The specification range also includes 1.50 in (38 mm) cells. This listing features 0.98 in (25 mm) cells; contact us to confirm the 38 mm configuration before ordering.

Before You Place Your Custom Order

  • Choose blackout, light-filtering, or sheer fabric and confirm the available color.
  • Provide the base width, center height, and usable recess depth.
  • Send a clear front-facing window photo and a close-up of the intended mounting surface.
  • Specify one semicircular shade or two halves for a full circular window.
  • Confirm the final order size, any deductions, and the mounting arrangement.

Need help checking the fit? Send us your measurements and photos by email or through our online store messaging before ordering.

*Important
It is important to provide the exact size of the window opening- especially the width- when ordering inside mount. Please do NOT measure any existing blinds or make your own adjustments to the dimensions of the opening. Depth requirements for this product are 2 inches
Installation Guide

Traditional Bracket Installation

Inside mount & outside mount instructions for bracket-mounted blinds and shades.

Before You Start: Check the Headrail

Installation brackets are usually attached to the headrail for shipping, rather than packed separately. Remove the brackets from the headrail before installing them. Secure the brackets to the mounting surface first, then attach the headrail.

Check the headrail and all packaging before assuming any parts are missing. If brackets are missing or lost, please contact customer service before installation.

Identify Your Bracket Type

The bracket style depends on your product and mounting method. Use the brackets supplied with your shade and follow any model-specific instructions.

Inside Mount

Compact Brackets

Inside mounting typically uses smaller brackets secured to the top interior surface of the window opening. The shade sits within the frame.

Outside Mount

Wall-Mount Brackets

Outside mounting typically uses larger, angled brackets secured to the wall or suitable trim above the window. The shade sits outside the opening.

Selected Products

Two-in-One Brackets

Some products use the same bracket for both mounting methods. Use the mounting face and screw holes specified for your chosen installation.

Bracket shapes, release mechanisms, spacing, and minimum mounting depths vary by model. This guide covers traditional screw-mounted brackets, not no-drill tension systems.

Tools & Fixings

Measuring tape, pencil, level, screwdriver, drill, and screws or anchors suitable for your mounting surface. Check for hidden wiring, pipes, and other obstructions before drilling.

Installation Video

Use the video and step-by-step images as a visual reference. Follow the instructions supplied with your product if its bracket design differs.

Open video on YouTube

Start Here: Prepare Your Brackets

Complete Steps 1–3, then follow the inside mount or outside mount instructions below.

1

Remove the Pre-Attached Brackets

Check the headrail for brackets attached during shipping. Release each bracket according to its clip or locking mechanism, without forcing it. Keep all brackets and fixings together for installation.

Step 1: Remove the inside mount or outside mount brackets attached to the headrail.
2

Measure & Mark the Positions

Hold the headrail at the intended mounting position, check that it is level, and mark the bracket locations. Follow your product instructions for bracket spacing and any additional support brackets.

Step 2: Measure and mark the bracket installation positions.
3

Mark the Screw Holes & Drill

Set the headrail aside. Use each bracket as a template to mark its screw holes, then drill the appropriate pilot holes. Use anchors or other fixings suitable for the mounting surface where required.

Step 3: Position the brackets at the markings and drill the screw holes.

Inside Mount Installation

Attach the brackets to the top interior surface of the window opening.

4A

Secure the Inside Mount Brackets

Screw the compact brackets into the prepared mounting positions, keeping them aligned. If your product uses two-in-one brackets, use the top-fixing holes specified for inside mounting.

Step 4A: Secure the inside mount brackets with screws at the top of the window opening.
5A

Attach the Headrail

For the clip-in brackets shown, hook the headrail into the front of the brackets, then rotate it down until it snaps into place. Support the headrail until every bracket is fully engaged.

Step 5A: Hook the headrail into the inside mount brackets and rotate it into its locked position.

Outside Mount Installation

Attach the brackets to the wall or suitable trim above the window opening.

4B

Secure the Outside Mount Brackets

Fasten the outside mount brackets at the marked positions, keeping them level and aligned. For two-in-one brackets, use the wall-fixing holes specified for outside mounting.

Step 4B: Secure the outside mount brackets to the wall above the window.
5B

Attach the Headrail

For the brackets shown, hook the headrail into the front of the brackets, then rotate it down until it locks into place. Confirm that every bracket is securely engaged before releasing the headrail.

Step 5B: Hook the headrail into the outside mount brackets and rotate it into its locked position.

Final Check Before Use

Confirm that all screws are secure, all brackets are engaged, and the headrail is level. Gently test the shade through its normal range of movement.

If the headrail feels loose or the shade does not operate smoothly, stop and check the installation. Do not force the headrail or operating mechanism.

Missing or Lost Brackets?

First, check whether the brackets are still attached to the headrail or tucked inside the packaging. If you cannot find them, please contact our customer service team.

Include your order number and photos of the headrail and any brackets you received so we can help identify the correct parts. Do not install the shade with missing or incompatible brackets.

iHomeBlinds / Made to Order

Shipping Policy

From order confirmation to your doorstep, here is what to expect when ordering custom blinds and shades from iHomeBlinds.

Standard Custom Production 3–5 business days
Angle Top / Motorized Production 5–7 business days
Shipping in Transit 5–7 business days after carrier transit begins

Production time and shipping time are separate. These estimates apply to custom-made products. Please allow additional time during holidays.

Your Order, Step by Step

01

Product & Size Confirmation

1–2 days

After receiving your order, we will review your product selections and measurements and send you a confirmation email. Please check the details carefully and let us know promptly if any corrections are needed.

If we do not receive a reply within 2 days of sending the confirmation email, we will proceed with production using the details shown in that email.
02

Custom Production

Made to your specifications

Following the order review and confirmation stage, your order enters production. The estimated production time depends on the product type:

Product Type Production Time
Standard Custom Blinds & Shades 3–5 business days
Angle Top Shades 5–7 business days
Motorized Shades 5–7 business days
Holiday notice: Production may take longer during holidays. Production estimates do not include shipping time.
03

Express Shipping

Typically 5–7 business days

Once your order is completed, we arrange shipment with the carrier. Shipping usually takes 5–7 business days once the carrier begins transporting your package.

We will update the tracking details on your order page and send you an email when the tracking number is available. Holidays, peak shipping periods, and carrier delays may extend transit time.

When does shipping time start? The transit estimate begins when the carrier starts transporting your package—not when you place your order or when a shipping label is created.
04

Delivery & Product Inspection

Please inspect on arrival

When your package arrives, please inspect both the product and the outer packaging. If you find any shipping damage, contact us as soon as possible and provide all three types of photos below:

  • Photo 01

    Product Damage

    Clear photos of the damaged product, including close-ups showing the affected parts.

  • Photo 02

    Outer Packaging Damage

    Photos of the outside of the box, including close-ups of any dents, tears, crushing, or other visible damage.

  • Photo 03

    Shipping Label

    A clear photo of the shipping label with the tracking number fully visible and readable.

Email the photos to service@ihomeblinds.com with your order number and a brief description of the issue. Our team will review the information and help arrange the appropriate solution, such as replacement parts or a remake where needed.

Please keep the product and packaging until our team has reviewed your case. If the box shows no visible damage, please still include photos of the outer packaging and shipping label.

Questions About Your Delivery?

Email our support team with your order number. For shipping damage, please include the three types of photos listed above.

service@ihomeblinds.com
Business days exclude weekends and public holidays. Production and shipping timeframes are estimates, not guaranteed delivery dates. Total delivery time includes order confirmation, production, and transit.

iHomeBlinds / Our Commitment

Limited Lifetime Quality Warranty

One year of free product-quality coverage, followed by ongoing replacement-part support. We are here to help you resolve product issues, even after the first year.

Within the First Year

Free Remake or Replacement Parts

If your iHomeBlinds product develops a confirmed product-quality issue within one year of its original delivery date, we will remake the affected product or send the replacement parts needed to resolve the issue, free of charge.

Our technical team will review the problem and recommend the appropriate solution.

No product or part charge. Shipping is on us.
After the First Year

Free Parts. Continued Support.

After the first year, we continue to provide free replacement parts for confirmed product-quality issues for as long as you own your iHomeBlinds product.

You pay the shipping cost. Our technical team will help identify the parts you need and explain how to replace them.

Replacement parts are free. You pay shipping.

How to Request Support

Having an issue with your blinds or shades? Please show us what is happening so we can help identify the right solution.

  1. Email Us Your Order Details

    Contact service@ihomeblinds.com with your order number and a brief description of the issue. If your order includes several products, tell us which one is affected.

  2. Include Clear Photos or a Video

    Please attach clear photos or a short video showing the product, the affected area or part, and the problem. For operating issues, a video showing what happens when you use the shade is especially helpful.

  3. Receive a Technical Review

    Our technical team will review your photos or video and reply by email with troubleshooting guidance and the next steps. We may ask for additional details to confirm the cause.

  4. Confirm the Solution

    Once the issue is assessed, we will arrange the appropriate replacement parts or remake under the terms above. Any charges payable by you will be confirmed before the solution is arranged.

Let Us Help Make It Right

Send us your order number, a description, and photos or a video.

service@ihomeblinds.com

Our technical team will respond by email. Please contact us before returning any product.

What this warranty covers: Manufacturing defects and product-quality issues in your iHomeBlinds blinds or shades. The appropriate solution is determined after our technical team reviews the reported problem.

What “lifetime” means: Ongoing replacement-part support for as long as you own your iHomeBlinds product, under the terms of this policy. It does not mean unconditional free replacement of the entire product or free shipping after the first year.

Nothing in this policy removes or restricts consumer rights that apply under local law.