French Door Patio Window Add on Cellular Shades Top Down Bottom Up No Drill Adhesive Blinds Model Q16C for 10mm Frame Depth

Q16C Installation Requirements

Before ordering, please carefully check your window or door frame. Q16C is designed for shallow window recesses and narrow frame edges, offering a slim and space-saving installation.

• 1. Measure Frame Depth Measure from the glass surface to the front face of the door or window frame. The standard required depth is 0.40" (10.2 mm). A shallower frame will result in additional shade projection.
• 2. Check Frame-Edge Width The clear mounting width should be at least 0.36" (9.2 mm). Check for handles, seals and other obstructions.
• 3. Verify Door Clearance Make sure the installed shade will not interfere with the door handle, adjacent doors, screens or surrounding walls. Pay extra attention if your frame depth is less than 10.2 mm.
• 4. Measure Glass Width & Height Measure the glass opening as shown in the guide. For standard installation, use the measured glass width and glass height as your order size.

Custom Size Range

Each Q16C shade is custom-made to your selected measurements. Choose the desired width and height from the available product options.

Reference dimensions for the Q16 series. Please refer to the selectable product options for confirmed Q16C size availability.

Q16A vs Q16B vs Q16C

Not all French door and window frames are the same. Our Q16 series offers different frame profiles designed for various installation conditions.

Compare the minimum recess depth, mounting-edge width and projected profile to choose the model that best fits your door or window.

Special Installation for Door Handle Obstructions

Some French doors have handles, hardware or other obstructions close to the glass edge. These may prevent a full-size shade frame from fitting properly.

If the available frame-edge width is less than 0.36" (9.2 mm), you may need to reduce the overall shade size to provide enough clearance.

Easy Adhesive Mounting

Q16C is designed for a clean and convenient installation without drilling holes into your French door or window frame.

Important Measuring Reminders

• Check Frame Recess Depth Q16C is designed for a standard minimum recess depth of 0.40" (10.2 mm). Shallower frames will result in additional outward projection and require careful fit verification.
• Check Frame-Edge Width Confirm a minimum clear mounting-edge width of 0.36" (9.2 mm), or follow the special measuring guide when an obstruction is present.
• Verify Door Clearance Check nearby door handles, screens and adjacent doors. The shade must not interfere with normal door operation.
• Enter Accurate Custom Dimensions Standard installation: W × H.
  Special installation: W1 × H1.
  Check your selected factory deduction option to avoid double deductions.
• Compare Q16 Models If Q16C is not suitable for your available frame depth, mounting-edge width or door clearance, consider Q16A or Q16B as alternatives.