No Drill Cordless 5G Top Down Bottom Up Premium Cellular Shades
No Drill Cordless 5G Top Down Bottom Up Premium Cellular Shades
No Drill Cordless 5G Top Down Bottom Up Premium Cellular Shades
No Drill Cordless 5G Top Down Bottom Up Premium Cellular Shades
No Drill Cordless 5G Top Down Bottom Up Premium Cellular Shades
No Drill Cordless 5G Top Down Bottom Up Premium Cellular Shades

No Drill Cordless 5G Top Down Bottom Up Premium Cellular Shades

Custom Size · Cordless · No-Drill Installation No-Drill Cordless Top-Down Bottom-Up Cellular Shades Adjust daylight and privacy...
SKU: 599.70353
Availability: In Stock
Product Type: Cellular Shades
$37.00 USD
$37.00 USD

Customize Your Shades
Description

Custom Size · Cordless · No-Drill Installation

No-Drill Cordless Top-Down Bottom-Up Cellular Shades

Adjust daylight and privacy from the top or bottom with easy-to-use clear lift handles. These custom cellular shades combine a neat honeycomb design with an inside-mount system that requires no drilling.

Check Your Window Before Ordering

Inside Mount Only

This no-drill model installs inside the window opening. It is not designed for outside mounting on the wall or on the face of the window trim.

1.5 in Minimum Depth

Your window frame must have at least 1.5 inches (38.1 mm) of depth. The headrail depth is also 1.5 inches (38.1 mm).

Custom Size Range

Order each shade to suit your window opening within the following size limits.

Dimensions in millimeters are the reference values; inch conversions are approximate.
Custom width 500–2000 mm
Approximately 19.69–78.74 inches
Maximum height 2000 mm
Approximately 78.74 inches
Mounting type No-drill inside mount only
Minimum frame depth 1.5 inches (38.1 mm)
Headrail depth 1.5 inches (38.1 mm)
Operation Manual cordless, top-down bottom-up
Default factory deduction 3 mm (approximately 0.12 inch) from both width and height
Alternative sizing option No Deduction

For dimensions outside this range, please contact us before ordering.

How to Measure for Inside Mount

  1. Measure the width. Measure the inside opening from left to right at the top, where the headrail will sit. Use the narrowest measurement in this mounting area.
  2. Measure the height. Measure from the top of the inside opening down to the window sill.
  3. Check the depth. Confirm that the frame provides at least 1.5 inches (38.1 mm) of depth at the mounting position.
  4. Check every window separately. Record the width and height for each opening before ordering.

Understand the Factory Deduction

With the default option, the factory subtracts 3 mm (approximately 0.12 inch) from both the submitted width and height. Submit your measured opening dimensions without subtracting this allowance a second time.

Select No Deduction if you require the submitted dimensions without this factory adjustment.

Flexible Light and Privacy Control

Top-Down Bottom-Up Adjustment

Lower the top rail to let daylight in above the shade, or raise the bottom rail to reveal the view below. Position the fabric where you need coverage.

Cordless Lift Handles

Adjust the shade manually using the clear handles on the movable rails, without a hanging operating cord.

Honeycomb Fabric Structure

Cellular air pockets help insulate the window. The fabric also helps soften sound for everyday comfort.

Light Filtering and Privacy

Light-filtering fabric softens incoming daylight while adding privacy to the covered part of your window.

Install in Four Steps

Position the shade inside the opening, secure the safety lock with the included hex key, and replace the cover. No drilling is required.

  1. Position the Left Side

    Push the shade into the upper-left corner of the window opening.

  2. Position the Right Side

    Push the shade into the upper-right corner of the window opening.

  3. Secure the Safety Lock

    Use the included hex key to turn the safety lock clockwise.

  4. Replace the Cover

    Press the rubber plug back into the access hole.

What's Included

  • 1 × Top-down bottom-up cellular shade
  • 1 × Hex key
  • 2 × Clear lift handles
  • 1 × Rubber plug

Frequently Asked Questions

Can I install this shade outside the window frame?

No. This model is designed for no-drill inside mounting only.

How much window depth do I need?

A minimum frame depth of 1.5 inches (38.1 mm) is required. The headrail itself is 1.5 inches (38.1 mm) deep.

What custom sizes are available?

Widths range from 500 to 2000 mm (approximately 19.69 to 78.74 inches). The maximum height is 2000 mm (approximately 78.74 inches).

Should I subtract an allowance before ordering?

Not when using the default factory deduction. The factory subtracts 3 mm (approximately 0.12 inch) from both the submitted width and height. A No Deduction option is also available.

Does this shade need batteries or a remote?

No. This is a manually operated cordless shade. Use the clear lift handles to adjust the top and bottom rails.

Measuring Guide

iHomeBlinds / Measure Before You Order

Measuring Guide

Follow these steps to measure for conventional blinds and shades. Start by choosing an inside or outside mount, then record your dimensions before placing your order.

Measure Each Window

Measure every window individually, even when the openings look the same.

Record Your Dimensions

When ordering in inches, measure to the nearest 1/8 inch. Keep width and height in the same unit.

Check the Product Page

Confirm the mounting requirements and available size options for your chosen product.

Inside Mount

The blind or shade is installed inside the window recess.

  1. 1. Check the Recess Depth

    Measure the usable depth inside your window recess. It must meet the minimum mounting depth shown on the product page. Check for handles or other obstacles that could interfere with installation.

  2. 2. Measure the Width

    Measure inside the recess at the top, middle, and bottom. Record the smallest width and enter that measurement as your order width.

  3. 3. Measure the Height

    Measure inside the recess at the left, middle, and right. Record the largest height and enter that measurement as your order height, unless your product page instructs otherwise.

Order Width = Smallest measured inside width

Order Height = Largest measured inside height

Example: If your smallest width is 34 3/8" and your largest height is 57 5/8", enter W 34 3/8" × H 57 5/8" in your order. Do not subtract the factory deduction yourself.

Inside mount diagram: measure width at the top, middle and bottom, and height at the left, middle and right.
Measure within the window recess.

Inside Mount: Choose Your Deduction Option

Default Option

3 mm Factory Deduction

We deduct 3 mm (approximately 0.12 inches) from the ordered width and from the ordered height. This is one deduction per dimension, not per side.

Enter your measured opening size without subtracting 3 mm. We apply the selected deduction during production.

Optional Selection

No / No Deduction

Select “No” or “No Deduction” when ordering to cancel the default factory deduction. We will not subtract the standard 3 mm from your entered dimensions.

Before selecting this option, confirm that your entered dimensions allow the fitting clearance required by your product.

Outside Mount

The blind or shade is installed outside the recess, with extra coverage around the opening.

  1. 1. Measure the Width & Add Coverage

    Measure across the outside of the window recess at the top, middle, and bottom. Following the illustrated guide, use the smallest width and add 4 inches to calculate your order width.

  2. 2. Measure the Height & Add Coverage

    Measure the height at the left, middle, and right. Use the largest height and add 4 inches to calculate your order height.

  3. 3. Confirm the Final Coverage

    Check that the planned size covers the entire opening and leaves room for the mounting hardware. Adjust the overlap as needed for your mounting position, trim, handles, and nearby obstacles.

Order Width = Measured width + 4" (101.6 mm)

Order Height = Measured height + 4" (101.6 mm)

Example: W 34 3/8" × H 57 5/8"
Order size: W 38 3/8" × H 61 5/8"

Outside mount diagram: take three width measurements and three height measurements around the window recess.
Allow extra coverage beyond the window opening.

Need Help Before Ordering?

Email us your window photos, measurements, preferred mounting style, and a link to the product you are considering.

service@ihomeblinds.com
This guide applies to conventional rectangular blinds and shades. For specialty products or product-specific exceptions, the measuring instructions and sizing requirements on the product page take priority.
Installation Guide
Shipping Policy

iHomeBlinds / Made to Order

Shipping Policy

From order confirmation to your doorstep, here is what to expect when ordering custom blinds and shades from iHomeBlinds.

Standard Custom Production 3–5 business days
Angle Top / Motorized Production 5–7 business days
Shipping in Transit 5–7 business days after carrier transit begins

Production time and shipping time are separate. These estimates apply to custom-made products. Please allow additional time during holidays.

Your Order, Step by Step

01

Product & Size Confirmation

1–2 days

After receiving your order, we will review your product selections and measurements and send you a confirmation email. Please check the details carefully and let us know promptly if any corrections are needed.

If we do not receive a reply within 2 days of sending the confirmation email, we will proceed with production using the details shown in that email.
02

Custom Production

Made to your specifications

Following the order review and confirmation stage, your order enters production. The estimated production time depends on the product type:

Product Type Production Time
Standard Custom Blinds & Shades 3–5 business days
Angle Top Shades 5–7 business days
Motorized Shades 5–7 business days
Holiday notice: Production may take longer during holidays. Production estimates do not include shipping time.
03

Express Shipping

Typically 5–7 business days

Once your order is completed, we arrange shipment with the carrier. Shipping usually takes 5–7 business days once the carrier begins transporting your package.

We will update the tracking details on your order page and send you an email when the tracking number is available. Holidays, peak shipping periods, and carrier delays may extend transit time.

When does shipping time start? The transit estimate begins when the carrier starts transporting your package—not when you place your order or when a shipping label is created.
04

Delivery & Product Inspection

Please inspect on arrival

When your package arrives, please inspect both the product and the outer packaging. If you find any shipping damage, contact us as soon as possible and provide all three types of photos below:

  • Photo 01

    Product Damage

    Clear photos of the damaged product, including close-ups showing the affected parts.

  • Photo 02

    Outer Packaging Damage

    Photos of the outside of the box, including close-ups of any dents, tears, crushing, or other visible damage.

  • Photo 03

    Shipping Label

    A clear photo of the shipping label with the tracking number fully visible and readable.

Email the photos to service@ihomeblinds.com with your order number and a brief description of the issue. Our team will review the information and help arrange the appropriate solution, such as replacement parts or a remake where needed.

Please keep the product and packaging until our team has reviewed your case. If the box shows no visible damage, please still include photos of the outer packaging and shipping label.

Questions About Your Delivery?

Email our support team with your order number. For shipping damage, please include the three types of photos listed above.

service@ihomeblinds.com
Business days exclude weekends and public holidays. Production and shipping timeframes are estimates, not guaranteed delivery dates. Total delivery time includes order confirmation, production, and transit.
Lifetime Warranty

iHomeBlinds / Our Commitment

Limited Lifetime Quality Warranty

One year of free product-quality coverage, followed by ongoing replacement-part support. We are here to help you resolve product issues, even after the first year.

Within the First Year

Free Remake or Replacement Parts

If your iHomeBlinds product develops a confirmed product-quality issue within one year of its original delivery date, we will remake the affected product or send the replacement parts needed to resolve the issue, free of charge.

Our technical team will review the problem and recommend the appropriate solution.

No product or part charge. Shipping is on us.
After the First Year

Free Parts. Continued Support.

After the first year, we continue to provide free replacement parts for confirmed product-quality issues for as long as you own your iHomeBlinds product.

You pay the shipping cost. Our technical team will help identify the parts you need and explain how to replace them.

Replacement parts are free. You pay shipping.

How to Request Support

Having an issue with your blinds or shades? Please show us what is happening so we can help identify the right solution.

  1. Email Us Your Order Details

    Contact service@ihomeblinds.com with your order number and a brief description of the issue. If your order includes several products, tell us which one is affected.

  2. Include Clear Photos or a Video

    Please attach clear photos or a short video showing the product, the affected area or part, and the problem. For operating issues, a video showing what happens when you use the shade is especially helpful.

  3. Receive a Technical Review

    Our technical team will review your photos or video and reply by email with troubleshooting guidance and the next steps. We may ask for additional details to confirm the cause.

  4. Confirm the Solution

    Once the issue is assessed, we will arrange the appropriate replacement parts or remake under the terms above. Any charges payable by you will be confirmed before the solution is arranged.

Let Us Help Make It Right

Send us your order number, a description, and photos or a video.

service@ihomeblinds.com

Our technical team will respond by email. Please contact us before returning any product.

What this warranty covers: Manufacturing defects and product-quality issues in your iHomeBlinds blinds or shades. The appropriate solution is determined after our technical team reviews the reported problem.

What “lifetime” means: Ongoing replacement-part support for as long as you own your iHomeBlinds product, under the terms of this policy. It does not mean unconditional free replacement of the entire product or free shipping after the first year.

Nothing in this policy removes or restricts consumer rights that apply under local law.