No Drill Cordless Roller Shades
No Drill Cordless Roller Shades
No Drill Cordless Roller Shades
No Drill Cordless Roller Shades
No Drill Cordless Roller Shades
No Drill Cordless Roller Shades
No Drill Cordless Roller Shades
No Drill Cordless Roller Shades
No Drill Cordless Roller Shades
No Drill Cordless Roller Shades

No Drill Cordless Roller Shades

SKU: 599.70558/596.10002
Product Type: Roller Shades
$33.00 USD
$33.00 USD

Customize Your Shades
Description
Made to Measure

No-Drill Cordless Roller Shades

A tailored look. Simple hand control. No drilling required.

Custom Width Range

20″–70″

508–1778 mm

Custom Height Range

20″–78″

508–1981.2 mm

Minimum Inside Mount Depth

1.8″

45.72 mm minimum frame depth

Light Control, Without the Cords

Bring a clean, coordinated finish to your windows with custom-sized polyester roller shades. The no-drill mounting system fits inside your window frame, while cordless operation lets you raise or lower the shade using the clear bottom-rail handle. Choose your fabric and dimensions to create the look and light level that suit your space.

No-Drill Inside Mount

Secure the shade inside your window opening using the tension mounting system. A hex key tightens the locking screw, so there is no need to drill mounting holes into your window frame.

Cordless Free-Stop Control

Lift or lower the shade by its clear bottom-rail handle and stop at your preferred position. Enjoy everyday adjustment without hanging pull cords or beaded chains.

Fabric-Matched Headrail Cover

A matching fabric cover conceals the front of the headrail, creating a coordinated appearance from top to bottom rather than leaving the mounting hardware exposed.

Optional Accessory

Telescoping Control Rod

Add extra reach for higher windows with an optional telescoping rod. It extends from 13" to 24" (33–61 cm) to help you reach and operate the bottom-rail handle.

Choose Your Light & Privacy

Light Filtering

Soften incoming daylight for a bright, gently diffused look. A welcoming choice for living rooms and shared spaces where you would like to keep some natural light. Silhouettes may remain visible depending on the fabric and lighting conditions.

Full Blackout Fabric

Choose opaque blackout fabric to block light passing through the shade material and create a darker setting. A practical option for bedrooms and spaces where stronger light control is preferred.

Blackout describes the fabric, not a completely light-sealed installation. Light may still enter around the edges of an inside-mounted shade.

Specification Details
Material Polyester
Custom Width 20–70 inches (508–1778 mm)
Custom Height 20–78 inches (508–1981.2 mm)
Mounting No-Drill Inside Mount Only
Control Cordless, Manual Free-Stop Operation
Minimum Frame Depth 1.8 inches (45.72 mm)
Fabric Options Light Filtering or Full Blackout
Headrail Cover Matching Fabric Cover
Handle Clear Handle at the Bottom Rail

Simple Three-Step Installation

1

Position the Left Side

Place the left end of the headrail into the upper-left corner of your window opening.

2

Fit the Right Side

Support the shade and position the right end inside the upper-right corner, keeping the headrail level.

3

Lock in Place

Use a hex key to tighten the locking screw as directed in the installation guide. Check that the shade is secure before operating it.

No drilling is required. A hex key is used to secure the mounting mechanism.

Before You Order

Measure Inside the Window Frame

Measure the width and height of the inside opening, not the outside edges of the decorative trim. Check the opening in multiple places and confirm that the mounting area has at least 1.8" (45.72 mm) of usable depth.

Enter Whole Inches & Fractions Separately

When the customization form asks for a whole number and a fraction, split your measurement into those two parts. For example, a width of 35 1/2" is entered as:

Width: 35  ·  Width Fraction: 1/2
Check Your Size-Deduction Selection

Review the deduction option shown when customizing your shade. If a factory deduction is selected, enter your measured opening dimensions without subtracting that allowance again. Choose “No Deduction” only when you have already allowed the necessary installation clearance in the dimensions you submit.

Need Help with Your Measurements?

Contact us by email before ordering with your measurements and a photo of the window opening. We can help you check the sizing details and understand the customization options.

Measuring Guide

iHomeBlinds / Measure Before You Order

Measuring Guide

Follow these steps to measure for conventional blinds and shades. Start by choosing an inside or outside mount, then record your dimensions before placing your order.

Measure Each Window

Measure every window individually, even when the openings look the same.

Record Your Dimensions

When ordering in inches, measure to the nearest 1/8 inch. Keep width and height in the same unit.

Check the Product Page

Confirm the mounting requirements and available size options for your chosen product.

Inside Mount

The blind or shade is installed inside the window recess.

  1. 1. Check the Recess Depth

    Measure the usable depth inside your window recess. It must meet the minimum mounting depth shown on the product page. Check for handles or other obstacles that could interfere with installation.

  2. 2. Measure the Width

    Measure inside the recess at the top, middle, and bottom. Record the smallest width and enter that measurement as your order width.

  3. 3. Measure the Height

    Measure inside the recess at the left, middle, and right. Record the largest height and enter that measurement as your order height, unless your product page instructs otherwise.

Order Width = Smallest measured inside width

Order Height = Largest measured inside height

Example: If your smallest width is 34 3/8" and your largest height is 57 5/8", enter W 34 3/8" × H 57 5/8" in your order. Do not subtract the factory deduction yourself.

Inside mount diagram: measure width at the top, middle and bottom, and height at the left, middle and right.
Measure within the window recess.

Inside Mount: Choose Your Deduction Option

Default Option

3 mm Factory Deduction

We deduct 3 mm (approximately 0.12 inches) from the ordered width and from the ordered height. This is one deduction per dimension, not per side.

Enter your measured opening size without subtracting 3 mm. We apply the selected deduction during production.

Optional Selection

No / No Deduction

Select “No” or “No Deduction” when ordering to cancel the default factory deduction. We will not subtract the standard 3 mm from your entered dimensions.

Before selecting this option, confirm that your entered dimensions allow the fitting clearance required by your product.

Outside Mount

The blind or shade is installed outside the recess, with extra coverage around the opening.

  1. 1. Measure the Width & Add Coverage

    Measure across the outside of the window recess at the top, middle, and bottom. Following the illustrated guide, use the smallest width and add 4 inches to calculate your order width.

  2. 2. Measure the Height & Add Coverage

    Measure the height at the left, middle, and right. Use the largest height and add 4 inches to calculate your order height.

  3. 3. Confirm the Final Coverage

    Check that the planned size covers the entire opening and leaves room for the mounting hardware. Adjust the overlap as needed for your mounting position, trim, handles, and nearby obstacles.

Order Width = Measured width + 4" (101.6 mm)

Order Height = Measured height + 4" (101.6 mm)

Example: W 34 3/8" × H 57 5/8"
Order size: W 38 3/8" × H 61 5/8"

Outside mount diagram: take three width measurements and three height measurements around the window recess.
Allow extra coverage beyond the window opening.

Need Help Before Ordering?

Email us your window photos, measurements, preferred mounting style, and a link to the product you are considering.

service@ihomeblinds.com
This guide applies to conventional rectangular blinds and shades. For specialty products or product-specific exceptions, the measuring instructions and sizing requirements on the product page take priority.
Installation Guide
Installation Guide

Traditional Bracket Installation

Inside mount & outside mount instructions for bracket-mounted blinds and shades.

Before You Start: Check the Headrail

Installation brackets are usually attached to the headrail for shipping, rather than packed separately. Remove the brackets from the headrail before installing them. Secure the brackets to the mounting surface first, then attach the headrail.

Check the headrail and all packaging before assuming any parts are missing. If brackets are missing or lost, please contact customer service before installation.

Identify Your Bracket Type

The bracket style depends on your product and mounting method. Use the brackets supplied with your shade and follow any model-specific instructions.

Inside Mount

Compact Brackets

Inside mounting typically uses smaller brackets secured to the top interior surface of the window opening. The shade sits within the frame.

Outside Mount

Wall-Mount Brackets

Outside mounting typically uses larger, angled brackets secured to the wall or suitable trim above the window. The shade sits outside the opening.

Selected Products

Two-in-One Brackets

Some products use the same bracket for both mounting methods. Use the mounting face and screw holes specified for your chosen installation.

Bracket shapes, release mechanisms, spacing, and minimum mounting depths vary by model. This guide covers traditional screw-mounted brackets, not no-drill tension systems.

Tools & Fixings

Measuring tape, pencil, level, screwdriver, drill, and screws or anchors suitable for your mounting surface. Check for hidden wiring, pipes, and other obstructions before drilling.

Installation Video

Use the video and step-by-step images as a visual reference. Follow the instructions supplied with your product if its bracket design differs.

Open video on YouTube

Start Here: Prepare Your Brackets

Complete Steps 1–3, then follow the inside mount or outside mount instructions below.

1

Remove the Pre-Attached Brackets

Check the headrail for brackets attached during shipping. Release each bracket according to its clip or locking mechanism, without forcing it. Keep all brackets and fixings together for installation.

Step 1: Remove the inside mount or outside mount brackets attached to the headrail.
2

Measure & Mark the Positions

Hold the headrail at the intended mounting position, check that it is level, and mark the bracket locations. Follow your product instructions for bracket spacing and any additional support brackets.

Step 2: Measure and mark the bracket installation positions.
3

Mark the Screw Holes & Drill

Set the headrail aside. Use each bracket as a template to mark its screw holes, then drill the appropriate pilot holes. Use anchors or other fixings suitable for the mounting surface where required.

Step 3: Position the brackets at the markings and drill the screw holes.

Inside Mount Installation

Attach the brackets to the top interior surface of the window opening.

4A

Secure the Inside Mount Brackets

Screw the compact brackets into the prepared mounting positions, keeping them aligned. If your product uses two-in-one brackets, use the top-fixing holes specified for inside mounting.

Step 4A: Secure the inside mount brackets with screws at the top of the window opening.
5A

Attach the Headrail

For the clip-in brackets shown, hook the headrail into the front of the brackets, then rotate it down until it snaps into place. Support the headrail until every bracket is fully engaged.

Step 5A: Hook the headrail into the inside mount brackets and rotate it into its locked position.

Outside Mount Installation

Attach the brackets to the wall or suitable trim above the window opening.

4B

Secure the Outside Mount Brackets

Fasten the outside mount brackets at the marked positions, keeping them level and aligned. For two-in-one brackets, use the wall-fixing holes specified for outside mounting.

Step 4B: Secure the outside mount brackets to the wall above the window.
5B

Attach the Headrail

For the brackets shown, hook the headrail into the front of the brackets, then rotate it down until it locks into place. Confirm that every bracket is securely engaged before releasing the headrail.

Step 5B: Hook the headrail into the outside mount brackets and rotate it into its locked position.

Final Check Before Use

Confirm that all screws are secure, all brackets are engaged, and the headrail is level. Gently test the shade through its normal range of movement.

If the headrail feels loose or the shade does not operate smoothly, stop and check the installation. Do not force the headrail or operating mechanism.

Missing or Lost Brackets?

First, check whether the brackets are still attached to the headrail or tucked inside the packaging. If you cannot find them, please contact our customer service team.

Include your order number and photos of the headrail and any brackets you received so we can help identify the correct parts. Do not install the shade with missing or incompatible brackets.

Shipping Policy

iHomeBlinds / Made to Order

Shipping Policy

From order confirmation to your doorstep, here is what to expect when ordering custom blinds and shades from iHomeBlinds.

Standard Custom Production 3–5 business days
Angle Top / Motorized Production 5–7 business days
Shipping in Transit 5–7 business days after carrier transit begins

Production time and shipping time are separate. These estimates apply to custom-made products. Please allow additional time during holidays.

Your Order, Step by Step

01

Product & Size Confirmation

1–2 days

After receiving your order, we will review your product selections and measurements and send you a confirmation email. Please check the details carefully and let us know promptly if any corrections are needed.

If we do not receive a reply within 2 days of sending the confirmation email, we will proceed with production using the details shown in that email.
02

Custom Production

Made to your specifications

Following the order review and confirmation stage, your order enters production. The estimated production time depends on the product type:

Product Type Production Time
Standard Custom Blinds & Shades 3–5 business days
Angle Top Shades 5–7 business days
Motorized Shades 5–7 business days
Holiday notice: Production may take longer during holidays. Production estimates do not include shipping time.
03

Express Shipping

Typically 5–7 business days

Once your order is completed, we arrange shipment with the carrier. Shipping usually takes 5–7 business days once the carrier begins transporting your package.

We will update the tracking details on your order page and send you an email when the tracking number is available. Holidays, peak shipping periods, and carrier delays may extend transit time.

When does shipping time start? The transit estimate begins when the carrier starts transporting your package—not when you place your order or when a shipping label is created.
04

Delivery & Product Inspection

Please inspect on arrival

When your package arrives, please inspect both the product and the outer packaging. If you find any shipping damage, contact us as soon as possible and provide all three types of photos below:

  • Photo 01

    Product Damage

    Clear photos of the damaged product, including close-ups showing the affected parts.

  • Photo 02

    Outer Packaging Damage

    Photos of the outside of the box, including close-ups of any dents, tears, crushing, or other visible damage.

  • Photo 03

    Shipping Label

    A clear photo of the shipping label with the tracking number fully visible and readable.

Email the photos to service@ihomeblinds.com with your order number and a brief description of the issue. Our team will review the information and help arrange the appropriate solution, such as replacement parts or a remake where needed.

Please keep the product and packaging until our team has reviewed your case. If the box shows no visible damage, please still include photos of the outer packaging and shipping label.

Questions About Your Delivery?

Email our support team with your order number. For shipping damage, please include the three types of photos listed above.

service@ihomeblinds.com
Business days exclude weekends and public holidays. Production and shipping timeframes are estimates, not guaranteed delivery dates. Total delivery time includes order confirmation, production, and transit.
Lifetime Warranty

iHomeBlinds / Our Commitment

Limited Lifetime Quality Warranty

One year of free product-quality coverage, followed by ongoing replacement-part support. We are here to help you resolve product issues, even after the first year.

Within the First Year

Free Remake or Replacement Parts

If your iHomeBlinds product develops a confirmed product-quality issue within one year of its original delivery date, we will remake the affected product or send the replacement parts needed to resolve the issue, free of charge.

Our technical team will review the problem and recommend the appropriate solution.

No product or part charge. Shipping is on us.
After the First Year

Free Parts. Continued Support.

After the first year, we continue to provide free replacement parts for confirmed product-quality issues for as long as you own your iHomeBlinds product.

You pay the shipping cost. Our technical team will help identify the parts you need and explain how to replace them.

Replacement parts are free. You pay shipping.

How to Request Support

Having an issue with your blinds or shades? Please show us what is happening so we can help identify the right solution.

  1. Email Us Your Order Details

    Contact service@ihomeblinds.com with your order number and a brief description of the issue. If your order includes several products, tell us which one is affected.

  2. Include Clear Photos or a Video

    Please attach clear photos or a short video showing the product, the affected area or part, and the problem. For operating issues, a video showing what happens when you use the shade is especially helpful.

  3. Receive a Technical Review

    Our technical team will review your photos or video and reply by email with troubleshooting guidance and the next steps. We may ask for additional details to confirm the cause.

  4. Confirm the Solution

    Once the issue is assessed, we will arrange the appropriate replacement parts or remake under the terms above. Any charges payable by you will be confirmed before the solution is arranged.

Let Us Help Make It Right

Send us your order number, a description, and photos or a video.

service@ihomeblinds.com

Our technical team will respond by email. Please contact us before returning any product.

What this warranty covers: Manufacturing defects and product-quality issues in your iHomeBlinds blinds or shades. The appropriate solution is determined after our technical team reviews the reported problem.

What “lifetime” means: Ongoing replacement-part support for as long as you own your iHomeBlinds product, under the terms of this policy. It does not mean unconditional free replacement of the entire product or free shipping after the first year.

Nothing in this policy removes or restricts consumer rights that apply under local law.